HD-500+90 Crane Duty Gearbox
Four stage helical gearbox with three helical stages plus a primary reduction, case-hardened and profile-ground gears, roller bearings throughout and a solid output shaft.
Dimensions (mm)
| Code | Dimension | CI body | Fabricated |
|---|---|---|---|
| Shafts | |||
| ØD1 | Input shaft Ø | 34 | 34 |
| L1 | Input shaft length | 75 | 75 |
| ØD2 | Output shaft Ø | 90 | 90 |
| L2 | Output shaft length | 150 | 150 |
| N | 115 | 115 | |
| M | 185 | 185 | |
| Overall | |||
| C | Centre distance, input to output | 500 | 500 |
| C1 | Primary shaft offset | 90 | 90 |
| A | Overall length | 890 | 910 |
| H | Overall height | 505 | 490 |
| h | Shaft centre height | 250 | 250 |
| h1 | Primary shaft height | 160 | 160 |
| S | 810 | 810 | |
| W | 295 | 295 | |
| B | Base width | 295 | 295 |
| Foot & mounting | |||
| Z | 170 | 170 | |
| T | 42.5 | 42.5 | |
| P | 270 | 270 | |
| Q | 195 | 195 | |
| R | 260 | 260 | |
| U | – | 42.5 | |
| F | 245 | 245 | |
| ØK | Foot bolt hole Ø | 21 | 21 |
| Keys | |||
| X1 | Input key width | 10 | 10 |
| Y1 | Input shaft to key top | 37.5 | 37.5 |
| X | Output key width | 25 | 25 |
| Y | Output shaft to key top | 95.5 | 95.5 |
| Weight & oil | |||
| Weight | Average weight | 380 kg | 380 kg |
| Oil | Oil quantity | 25 L | 25 L |
Letter codes match the GA drawing. Weight and oil quantity are indicative. Dimensions are subject to change with product development.
Power ratings
| Ratio i | n₂ rpm | kW @1500 | kW @1000 | kW @750 |
|---|---|---|---|---|
| 160:1 | 9.4 | 17 | 11.3 | 9 |
| 180:1 | 8.3 | 14.4 | 9.6 | 7.7 |
| 200:1 | 7.5 | 12.2 | 8.1 | 6.5 |
| 224:1 | 6.7 | 10.4 | 6.9 | 5.5 |
| 250:1 | 6 | 8.8 | 5.9 | 4.7 |
| 280:1 | 5.4 | 7.5 | 5 | 4 |
| 315:1 | 4.8 | 6.4 | 4.2 | 3.4 |
| 355:1 | 4.2 | 5.4 | 3.6 | 2.9 |
| 400:1 | 3.8 | 4.6 | 3 | 2.4 |
| 450:1 | 3.3 | 3.9 | 2.6 | 2.1 |
| 500:1 | 3 | 3.3 | 2.2 | 1.7 |
| 560:1 | 2.7 | 2.8 | 1.9 | 1.5 |
Nominal input power in kW at the stated input speed. n₂ is the nominal output speed at 1500 rpm input. Consult J.S. Gear for application-specific selection.
Output shaft loading
Permissible overhung load on the output shaft is 25 kN, acting at the middle of the shaft extension (L/2). Above this, support the drum on its own shaft and bearings with a flexible coupling, or use the standard gear ring below.
Standard gear ring · HC-500
| ØD | ØP | ØS | C | SL1 | T | ØDR | ØB | BL |
|---|---|---|---|---|---|---|---|---|
| 450 | 375 | 250 | 245 | 5 | 28 | 21 | 125 | 50 |
| 550 | 475 | 300 | 245 | 5 | 28 | 21 | 125 | 50 |
All dimensions in mm. Other gear ring sizes on request. Request a certified drawing before manufacture.
Need a price or a certified GA drawing?
Send the duty for HD-500+90 and we reply with price, delivery and a certified GA drawing.