HD-1395+225 F Crane Duty Gearbox
Four stage helical gearbox with three helical stages plus a primary reduction, case-hardened and profile-ground gears, roller bearings throughout and a solid output shaft. Heavy duty fabricated steel housing.
Dimensions (mm)
| Code | Dimension | Fabricated |
|---|---|---|
| Shafts | ||
| ØD1 | Input shaft Ø | 100 |
| L1 | Input shaft length | 140 |
| ØD2 | Output shaft Ø | 290 |
| L2 | Output shaft length | 355 |
| N | 270 | |
| M | 525 | |
| Overall | ||
| C | Centre distance, input to output | 1395 |
| C1 | Primary shaft offset | 225 |
| A | Overall length | 2550 |
| H | Overall height | 1400 |
| h | Shaft centre height | 695 |
| h1 | Primary shaft height | 470 |
| S | 2290 | |
| W | 975 | |
| B | Base width | 1010 |
| Foot & mounting | ||
| Z | 515 | |
| T | 140 | |
| P | 850 | |
| Q | 550 | |
| R | 650 | |
| U | 100 | |
| F | 880 | |
| ØK | Foot bolt hole Ø | 52 |
| Keys | ||
| X1 | Input key width | 28 |
| Y1 | Input shaft to key top | 106.5 |
| X | Output key width | 70 |
| Y | Output shaft to key top | 305.5 |
| Weight & oil | ||
| Weight | Average weight | 8100 kg |
| Oil | Oil quantity | 425 L |
Letter codes match the GA drawing. Weight and oil quantity are indicative. Dimensions are subject to change with product development.
Power ratings
| Ratio i | n₂ rpm | kW @1500 | kW @1000 | kW @750 |
|---|---|---|---|---|
| 140:1 | 10.7 | 320.6 | 211.5 | 169.2 |
| 160:1 | 9.4 | 272.5 | 179.7 | 143.8 |
| 180:1 | 8.3 | 231.6 | 152.8 | 122.2 |
| 200:1 | 7.5 | 196.9 | 129.8 | 103.9 |
| 224:1 | 6.7 | 167.3 | 110.4 | 88.3 |
| 250:1 | 6 | 142.2 | 93.8 | 75 |
| 280:1 | 5.4 | 120.9 | 79.7 | 63.8 |
| 315:1 | 4.8 | 102.7 | 67.8 | 54.2 |
| 355:1 | 4.2 | 87.3 | 57.6 | 46.1 |
| 400:1 | 3.8 | 74.2 | 48.9 | 39.1 |
| 450:1 | 3.3 | 63.1 | 41.6 | 33.3 |
| 500:1 | 3 | 53.6 | 35.3 | 28.3 |
| 560:1 | 2.7 | 45.6 | 30 | 24 |
Nominal input power in kW at the stated input speed. n₂ is the nominal output speed at 1500 rpm input. Consult J.S. Gear for application-specific selection.
Output shaft loading
Permissible overhung load on the output shaft is 210 kN, acting at the middle of the shaft extension (L/2). Above this, support the drum on its own shaft and bearings with a flexible coupling, or use the standard gear ring below.
Standard gear ring · HC-1395
| ØD | ØP | ØS | C | SL1 | T | ØDR | ØB | BL |
|---|---|---|---|---|---|---|---|---|
| 1100 | 925 | 750 | 735 | 10 | 90 | 52 | 360 | 100 |
| 1250 | 1050 | 850 | 735 | 10 | 90 | 52 | 360 | 100 |
| 1400 | 1200 | 950 | 735 | 10 | 90 | 52 | 360 | 100 |
All dimensions in mm. Other gear ring sizes on request. Request a certified drawing before manufacture.
Need a price or a certified GA drawing?
Send the duty for HD-1395+225 F and we reply with price, delivery and a certified GA drawing.