HD-1000+200 Crane Duty Gearbox
Four stage helical gearbox with three helical stages plus a primary reduction, case-hardened and profile-ground gears, roller bearings throughout and a solid output shaft.
Dimensions (mm)
| Code | Dimension | CI body | Fabricated |
|---|---|---|---|
| Shafts | |||
| ØD1 | Input shaft Ø | 80 | 80 |
| L1 | Input shaft length | 150 | 150 |
| ØD2 | Output shaft Ø | 200 | 200 |
| L2 | Output shaft length | 300 | 300 |
| N | 220 | 220 | |
| M | 395 | 395 | |
| Overall | |||
| C | Centre distance, input to output | 1000 | 1000 |
| C1 | Primary shaft offset | 200 | 200 |
| A | Overall length | 1810 | 1810 |
| H | Overall height | 880 | 880 |
| h | Shaft centre height | 430 | 430 |
| h1 | Primary shaft height | 230 | 230 |
| S | 1610 | 1610 | |
| W | 640 | 640 | |
| B | Base width | 640 | 640 |
| Foot & mounting | |||
| Z | 315 | 315 | |
| T | 85 | 85 | |
| P | 525 | 525 | |
| Q | 380 | 380 | |
| R | 535 | 535 | |
| U | – | 85 | |
| F | 530 | 530 | |
| ØK | Foot bolt hole Ø | 38 | 38 |
| Keys | |||
| X1 | Input key width | 22 | 22 |
| Y1 | Input shaft to key top | 85.5 | 85.5 |
| X | Output key width | 45 | 45 |
| Y | Output shaft to key top | 210.5 | 210.5 |
| Weight & oil | |||
| Weight | Average weight | 2800 kg | 2800 kg |
| Oil | Oil quantity | 190 L | 190 L |
Letter codes match the GA drawing. Weight and oil quantity are indicative. Dimensions are subject to change with product development.
Power ratings
| Ratio i | n₂ rpm | kW @1500 | kW @1000 | kW @750 |
|---|---|---|---|---|
| 160:1 | 9.4 | 114.3 | 76.5 | 61.2 |
| 180:1 | 8.3 | 97.1 | 65 | 52 |
| 200:1 | 7.5 | 82.6 | 55.3 | 44.2 |
| 224:1 | 6.7 | 70.2 | 47 | 37.6 |
| 250:1 | 6 | 59.6 | 39.9 | 31.9 |
| 280:1 | 5.4 | 50.7 | 33.9 | 27.1 |
| 315:1 | 4.8 | 43.1 | 28.8 | 23 |
| 355:1 | 4.2 | 36.6 | 24.5 | 19.6 |
| 400:1 | 3.8 | 31.1 | 20.8 | 16.6 |
| 450:1 | 3.3 | 26.4 | 17.7 | 14.1 |
| 500:1 | 3 | 22.5 | 15 | 12 |
| 560:1 | 2.7 | 19.1 | 12.8 | 10.2 |
Nominal input power in kW at the stated input speed. n₂ is the nominal output speed at 1500 rpm input. Consult J.S. Gear for application-specific selection.
Output shaft loading
Permissible overhung load on the output shaft is 100 kN, acting at the middle of the shaft extension (L/2). Above this, support the drum on its own shaft and bearings with a flexible coupling, or use the standard gear ring below.
Standard gear ring · HC-1000
| ØD | ØP | ØS | C | SL1 | T | ØDR | ØB | BL |
|---|---|---|---|---|---|---|---|---|
| 800 | 675 | 550 | 525 | 7 | 60 | 37 | 240 | 65 |
| 900 | 750 | 600 | 525 | 7 | 60 | 37 | 240 | 65 |
| 1000 | 825 | 650 | 525 | 7 | 60 | 37 | 240 | 65 |
All dimensions in mm. Other gear ring sizes on request. Request a certified drawing before manufacture.
Need a price or a certified GA drawing?
Send the duty for HD-1000+200 and we reply with price, delivery and a certified GA drawing.